Riso EZ Series Specifications Page 81
- Page / 134
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Advanced Features
Setting Up User Management
81
Suspend a user
You can enable or disable any user from using the machine.
A disabled user is not allowed to use the machine.
Important!:
• The administrator must be registered in advance from “Create User”. ()p.78)
1 Press the key and enter the item
number “82”.
2 Press the [ ] key.
The user number entry mode is activated.
3 Enter a user number using the Print
Quantity keys.
4 Press the [ ] key.
The “Disable” mode is activated.
Note:
• If you enter an unregistered user number or
administrator No. “0”, the alarm sounds and the
user number entry mode is restored. Enter a
correct user number.
5 Enter a parameter number using the
Print Quantity keys.
0 : ON
1 : OFF
6 Press the [ ] key.
The selected user is suspended, and the next reg-
istered user number is displayed.
Repeat steps 3 through 6 to continue to disable
other users.
Important!:
• If you press the key before pressing the
[] key, the setting is canceled and the nor-
mal mode is restored.
• If you press the key before pressing the
[] key, the setting is applied and the normal
mode is restored.
• An Error No.(F-39) is displayed when a dis-
abled user inputs the PIN code. Press the
key to release the error.
Note:
• When the last registered user has been sus-
pended, the item number entry mode is
restored.
REG-LL_EN.book Page 81 Wednesday, September 14, 2011 12:03 PM
- BCaution: 1
- Contents 2
- Setting up for Printing 48 3
- Advanced Features 52 3
- Cleaning 98 4
- Troubleshooting 102 4
- Appendixes 122 4
- About This User's Guide 5
- Getting Acquainted 6
- Control Panels 8
- Sub Control Panel 10
- Before Starting to Use 12
- Power connection 13
- Connection Method 14
- Software Installation 15
- Paper Recommendations 16
- Tips for Better Paper Feeding 17
- Storing Environment 17
- Originals 18
- Materials Not to Be Printed 19
- Preparing to Print 20
- Adding or Replacing Paper 21
- Closing the Paper Feed Tray 21
- 3 Set the Paper Stopper 22
- (For EZ3XX only) 23
- 6 Set the corrugators 24
- Basic Operations 26
- Consumables 27
- Ink Handling 27
- Location of Caution Label 27
- Basic Process 28
- 4 Make necessary settings 30
- 5 Press the key 30
- 7 Press the key 30
- 8 Press the key 31
- 9 Remove the printed paper 31
- (Optional Kit Required) 32
- Setting up for 34
- Scanning Originals 34
- [Pencil] 35
- [Dot Process] 36
- (For EZ3XX only) 36
- [Enlargement/Reduction] 37
- [Zoom] (For EZ3XX only) 38
- [Scanning Level Adjustment] 39
- Reproducing Bound Documents 40
- [Book Shadow Edit] 40
- [2-Up Printing] 41
- Restrictions on 2-Up Printing 42
- Paper orientation 43
- Operational Procedure 44
- 6 Press the key 45
- Automatic Printing 46
- [Auto-Process] 46
- Saving Ink [Ink Saving] 47
- Setting up for Printing 48
- Adjusting the Print Density 49
- [Print Density Adjustment] 49
- Adjusting the Print Position 50
- [Print Position Adjustment] 50
- Changing the Print Speed 51
- [Print Speed Adjustment] 51
- Advanced Features 52
- Program B (Multi-Page Mode) 53
- How to Program Print 53
- 2 Press the [ ] key 54
- 4 Press the [ ] key 54
- 6 Press the [ ] key 55
- 7 Place an original 55
- 8 Make necessary settings 55
- 9 Press the key 56
- 10 Press the key again 56
- 6 Place an original 58
- 7 Make necessary settings 58
- 9 Press the key again 58
- Saving Programs 59
- Retrieving a Program 60
- 5 Store a program 61
- Clearing Programs 62
- Idling Action [Idling] 64
- [Confidential Mode] 65
- [Custom Setting Mode] 66
- Operation Procedure 73
- IP Address Setting 75
- Setting Up User Management 77
- 1 Press the key 78
- 2 Enter an item number 78
- 3 Press the [ ] key 78
- 5 Press the [ ] key 78
- 6 Enter the PIN code 79
- 7 Press the [ ] key 79
- 9 Press the [ ] key 79
- Suspend a user 81
- Reset all User Counters 84
- Output the ID Counter Report 86
- 3 Press the key 87
- Replacing and Disposing 88
- 5 Lock the Ink Cartridge 89
- 6 Close the Front Cover 89
- Replacing the Master Roll 90
- 7 Install a new Master Roll 91
- Discard the ejected masters 93
- Ink Cartridge 95
- Master Roll 95
- Ejected Master 95
- Drum (Cylinder) 96
- Cleaning 98
- Pressure Roller 100
- Printer Exterior 101
- Troubleshooting 102
- Check & Error Display 103
- ADF Original Release Lever 106
- Original Release Dial 106
- Quantity keys 111
- Troubleshooting Tips 112
- Appendixes 122
- Specifications 123
- RISO EZ371 124
- RISO EZ331 125
- RISO EZ301 126
- RISO EZ231 127
- RISO EZ221 128
- RISO EZ201 129
- Feature List 130
© 2020, manymanuals.com. All rights reserved. | 1.291 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals