Riso EZ Series Specifications Page 112
- Page / 134
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Troubleshooting
Troubleshooting Tips
112
Troubleshooting Tips
If any problems occur during printing, check the following items and take appropriate procedures before calling your
dealer (or authorized service representative).
Problem Cause Action
The machine does not start when the
power switch is pressed.
The power was turned off without
notice of the Sleep status.
Try pressing the power switch again.
Before pressing the power switch,
you may want to find out whether the
machine is indeed in the Sleep
Mode, by checking the indicator
on the Control Panel. If the key is
lit, the machine is in sleep mode.
Press the key to end sleep mode
and to activate the machine.
Power has been disconnected. • Check if the power cord has been
firmly connected to a electrical
outlet.
• Check if the power cord has been
firmly connected to the machine.
• Check if the commercial power
circuit breaker is on.
does not go off even when the
Front Cover is closed.
The bottom right of the Front Cover
has not been firmly closed.
Firmly close the bottom right of the
Front Cover.
The Paper Feed Tray cannot be
closed.
• The Feed Paper Tray Guides
have not been widen up to the
limit.
• The power was turned off before
the Paper Feed Tray was lowered
to the bottom.
Turn the power on and lower the
Paper Feed Tray to the bottom. Set
the Feed Tray Paper Guide Lock
Lever to , widen the Feed
Tray Paper Guides up to the limit,
and close the Paper Feed Tray.
The Print Drum (Cylinder) cannot be
placed into position.
The Print Drum (Cylinder) was
stopped at an inappropriate position
after rotation.
After manually rotating the drum
(cylinder), make sure that the
mark and the mark meet as
shown.
The Print Drum (Cylinder) has not
been correctly set to the guide.
Set the drum (cylinder) to the guide
correctly.
)p.96
REG-LL_EN.book Page 112 Wednesday, September 14, 2011 12:03 PM
- BCaution: 1
- Contents 2
- Setting up for Printing 48 3
- Advanced Features 52 3
- Cleaning 98 4
- Troubleshooting 102 4
- Appendixes 122 4
- About This User's Guide 5
- Getting Acquainted 6
- Control Panels 8
- Sub Control Panel 10
- Before Starting to Use 12
- Power connection 13
- Connection Method 14
- Software Installation 15
- Paper Recommendations 16
- Tips for Better Paper Feeding 17
- Storing Environment 17
- Originals 18
- Materials Not to Be Printed 19
- Preparing to Print 20
- Adding or Replacing Paper 21
- Closing the Paper Feed Tray 21
- 3 Set the Paper Stopper 22
- (For EZ3XX only) 23
- 6 Set the corrugators 24
- Basic Operations 26
- Consumables 27
- Ink Handling 27
- Location of Caution Label 27
- Basic Process 28
- 4 Make necessary settings 30
- 5 Press the key 30
- 7 Press the key 30
- 8 Press the key 31
- 9 Remove the printed paper 31
- (Optional Kit Required) 32
- Setting up for 34
- Scanning Originals 34
- [Pencil] 35
- [Dot Process] 36
- (For EZ3XX only) 36
- [Enlargement/Reduction] 37
- [Zoom] (For EZ3XX only) 38
- [Scanning Level Adjustment] 39
- Reproducing Bound Documents 40
- [Book Shadow Edit] 40
- [2-Up Printing] 41
- Restrictions on 2-Up Printing 42
- Paper orientation 43
- Operational Procedure 44
- 6 Press the key 45
- Automatic Printing 46
- [Auto-Process] 46
- Saving Ink [Ink Saving] 47
- Setting up for Printing 48
- Adjusting the Print Density 49
- [Print Density Adjustment] 49
- Adjusting the Print Position 50
- [Print Position Adjustment] 50
- Changing the Print Speed 51
- [Print Speed Adjustment] 51
- Advanced Features 52
- Program B (Multi-Page Mode) 53
- How to Program Print 53
- 2 Press the [ ] key 54
- 4 Press the [ ] key 54
- 6 Press the [ ] key 55
- 7 Place an original 55
- 8 Make necessary settings 55
- 9 Press the key 56
- 10 Press the key again 56
- 6 Place an original 58
- 7 Make necessary settings 58
- 9 Press the key again 58
- Saving Programs 59
- Retrieving a Program 60
- 5 Store a program 61
- Clearing Programs 62
- Idling Action [Idling] 64
- [Confidential Mode] 65
- [Custom Setting Mode] 66
- Operation Procedure 73
- IP Address Setting 75
- Setting Up User Management 77
- 1 Press the key 78
- 2 Enter an item number 78
- 3 Press the [ ] key 78
- 5 Press the [ ] key 78
- 6 Enter the PIN code 79
- 7 Press the [ ] key 79
- 9 Press the [ ] key 79
- Suspend a user 81
- Reset all User Counters 84
- Output the ID Counter Report 86
- 3 Press the key 87
- Replacing and Disposing 88
- 5 Lock the Ink Cartridge 89
- 6 Close the Front Cover 89
- Replacing the Master Roll 90
- 7 Install a new Master Roll 91
- Discard the ejected masters 93
- Ink Cartridge 95
- Master Roll 95
- Ejected Master 95
- Drum (Cylinder) 96
- Cleaning 98
- Pressure Roller 100
- Printer Exterior 101
- Troubleshooting 102
- Check & Error Display 103
- ADF Original Release Lever 106
- Original Release Dial 106
- Quantity keys 111
- Troubleshooting Tips 112
- Appendixes 122
- Specifications 123
- RISO EZ371 124
- RISO EZ331 125
- RISO EZ301 126
- RISO EZ231 127
- RISO EZ221 128
- RISO EZ201 129
- Feature List 130
© 2020, manymanuals.com. All rights reserved. | 1.442 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals