Riso EZ Series Specifications download pdf (Page 78)

Advanced Features

Setting Up User Management

Registering Administrator/Users [Create User]

In order to set the User Management function, the administrator must be registered in advance.

Up to 100 users can be registered (administrator included).

A PIN code and group number are set for each user number.

Note:

• Press the [C] key to cancel the entered value.

• Press [] key to return to the previous step.

1 Press the key.

Its indicator turns on.

Important!:

• If the RISO Network Card (option) is installed,

you will not be able to enter the Custom Setting

mode for up to one minute after turning the

power on.

Note:

• To clear the setting, press the key again to

turn off its indicator.

2 Enter an item number.

The item number is 80.

3 Press the [ ] key.

“U- 0” is displayed with “0” flashing. Go to step 4 to

If “0” does not flash, register the administrator. Go

to step 5.

4 Enter the user number (1 to 99) to

Quantity keys.

To change the registration of the administrator,

enter “0”.

5 Press the [ ] key.

After “PASS” is displayed, the machine enters the

PIN code entry mode automatically.

The PIN code that is currently registered flashes.

“0” flashes if the PIN code is not registered.

Note:

• If the entered user number is already regis-

tered, the registered PIN code is displayed.

• To clear this registration, enter “0” and press

the [] key. (The clearance of the registration

is applied and operation returns to step 4.)

• To clear the administrator’s registration, see

“Clearing all User Management Function Set-

tings”. )p.78

However, this will clear all User Management

settings such as the user registration.

REG-LL_EN.book Page 78 Wednesday, September 14, 2011 12:03 PM

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 133 134

Comments to this Manuals

No comments

Riso EZ Series Specifications Page 78

Comments to this Manuals